Autogas Installers - Special clearance
items that can be purchased from us direct.
No account necessary!
Q: What do you manufacture?
A:
Virtually all of the electronic controls
that are required to successfully run modern fuel injected cars, trucks, busses,
trains and stationary motors on the following fuels:
1/
LPG (Propane and/or Butane more commonly referred
to as Autogas);
2/
CNG (Methane which is more commonly referred to
as Natural Gas);
3/
Diesel-Gas (Diesel Fumigation introduces both
fuels into the motor simultaneously to increase torque, decrease overall fuel
consumption and reduce emissions).
Q: How long have you been designing and manufacturing these products?
A: We began designing and manufacturing these products in July 1988 - ie for more than 18 years. We also design products for other members of the Alternative Fuels Group. Our product designs are well proven with several hundred thousand vehicles around the world relying on them day after day. We also buy and distribute some specialised electronic products that are manufactured by other members of the Alternative Fuels Group. Overall this arrangement maximises the product range whilst keeping product pricing low.
Q: Do you manufacture the mechanical equipment for vehicles to run on the above fuels?
A: No, we specialise only in the electronic controls. We can however supply the names of distributors who can supply the mechanical components that are required for vehicles to run on these alternative fuels. Just let us know your location when enquiring.
Q: Can I purchase equipment directly from you?
A: Australia -
Generally our distributors supply our electronic controls across Australia. If
you contact us and advise which State or Territory you live in, we will supply
you with the details of our closest distributor.
A: Overseas - If we have a distributor in your
country we will put you in contact with them. If we are not represented in your
country we can supply you direct. We accept payment by Visa, Mastercard of by
direct payment to our bank account.
To find out more about the products of The
Alternative Fuels Group please visit
www.gastec.ws
Australian Residents can
now apply for the Federal Government Subsidy
by having their car converted to LPG!
There is also a link to the Western Australian Government website detailing that
State's $1000 LPG rebate.
PRODUCTS THAT DRIVE THE FUTURE
A New Zealand affiliate site can be found at www.gastec.co.nz
This site was last updated on 31st August 2006.
Search Engine Criteria - Products that are manufactured and/or supplied:
FP30 - GASTEC FUEL PROCESSOR (For European Convertors) - now discontinued.
FP30-PS - Same as FP30 but incorporating an adjustable petrol start unit.
FP31 - GASTEC FUEL PROCESSOR (For European Convertors).
FP31-PS - Same as FP31 but incorporating an adjustable petrol start unit.
FP50-PS-SS - Microprocessor Controlled GASTEC FUEL PROCESSOR. Complete turnkey
product with Rev-changeover,
O2 Emulation, Injector Emulation and Gas Safety Switch built-in. Due for release
October 2006.
IMP6 - LPG/CNG FUEL PROCESSOR (for American Convertors like Impco or Nolf or Australian LG).
SD40 - Safety Switch - Pulse Trigger from high tension lead or
negative coil (under bonnet mounting, waterproof, re-prime every time, 10 amp).
SD60 - Safety Switch - Oil Pressure Switch Trigger (under bonnet mounting,
waterproof, re-prime every time, 10 amp).
PS1, Low cost self timing non-adjustable petrol start unit (under bonnet mounting).
IHO1 - Injector Hold-On Unit (fully adjustable petrol start device), 10 amp.
DS6 - Dual Start Device for easier starting in cold weather. Rated at 10 amp. Under Bonnet installation. Operates down to 8.5 volts.
EF1 Module - GASTEC complete Start Module to suit EA to EL Ford Falcon. Now discontinued.
905 - Slimline 90 ohm gauge. Miniature 5 light LED gauge.
PG90R - 90 ohm LED gauge that snaps into the dashboard. Fits 20mm hole. Almost fully flush mounted. Matches SW2/SW3 switches.
IE2 - INJECTOR EMULATOR includes internal injector relay.
IE5 - Complex INJECTOR EMULATOR includes internal injector relay.
IE6 - Latest INJECTOR EMULATOR includes internal injector relay.
IEH-10 - Complex Hybrid INJECTOR EMULATOR. Due for release November 2006.
IEH-20 - Complex Microprocessor Controlled Hybrid INJECTOR EMULATOR. Due for release December 2006.
OA1 - 3 LIGHT OXYGEN ANALYSER (FOR TUNING EFI VEHICLES).
NTPS - FUEL PROCESSOR INTERFACE ADAPTOR FOR VEHICLES WITHOUT TPS SENSORS.
O2E - OXYGEN EMULATOR PREVENTS ENGINE MANAGEMENT LIGHTS & BLOCK LEARN MOVEMENTS
SW2 - STYLISH 2 POSITION DASH PETROL/GAS SWITCH - Fits 20mm Hole. Almost fully flush mounted.
SW3 - STYLISH 3 POSITION DASH PETROL/GAS SWITCH - Fits 20mm Hole. Almost fully flush mounted.
The Alternative Fuels Group specialise in the
manufacture of autogas electronics for cars, trucks and buses. The Alternative
Fuels Group supply their electronics to many companies around the world who
install equipment manufactured by BRC, IMPCO, Tartarini, Lovato, Stargas, AMR,
OMVL, Romano, Kargas, Sprintgas and Nolf.
Autogas conversion electronics to suit OMVL, Romano, Kargas, Sprintgas, Nolf,
BRC, IMPCO, Tartarini, Lovato, Stargas, Vialle and AMR.
The Alternative Fuels Group manufacture autogas electronics for LPG, propane,
butane, methane, natural gas, diesel gas and diesel fumigation.
Gore Research Gastec Autogas Emission Compliance Electronics for LPG, CNG and NGV vehicles.